Specifications for Steadyshake™ 797R
Temperature | 0°C to 70°C |
Temperature Control |
Auto-tune PID microprocessor temperature controller, platinum RTD sensor
|
Temperature Display |
Digital to 0.1oC |
Accuracy/Uniformity | ±0.1°C /±0.7°C at 37°C |
Insulation | 1.5” all around chamber |
Safety Features | Safety device protects samples by preventing overheating.
Shaking stops when lid is opened. Auto-restart after power failure. |
Shelf | One supplied, additional shelves optional |
Viewing Window |
Double-paned, 1.5” (38mm) thick, with sliding panel |
Spring Rack | Accommodates an accessory spring rack that can shake flasks up
to 1-L without the use of clips or clamps as well as 15-mL or
50-mL Falcon tubes placed horizontally, vertically, or at 45o to the
platform
|
Gas Manifold |
16, 32 or more ports for introduction of nitrogen or carbon
dioxide directly into shaking flasks or vessels instead of into the
chamber |
Drive |
Dynamically balanced triple-eccentric drive with permanently
lubricated bearings eliminates the need for adjustments as the load
changes |
Motor |
Maintenance-free, brushless motor cooled by a fan |
Speed Range |
25 to 400 RPM |
Speed Display | Digital |
Orbit | 25mm (1") orbit provides higher oxygen transfer rate than 19mm. |
Chamber Material | Stainless steel |
Chamber Dimensions |
27.6”W x 23.4”D x 47.2”H (700mmW x 595mmD x 1200mmH), 500L |
Overall Dimensions |
31.1”W x 31.5”D x 65”H (790mm x 800mm x 1650mm) |
Platform Dimensions |
23.6”W x 18.9”D (600mm x 480mm) |
Power Source |
120V, 50/60Hz, single phase, 14A (220V available)
|
Flask Capacity
Flask Size (mL) | 50 |
125 |
250 |
500 |
1000 |
2000 |
2800 |
4000 |
8000 |
No. of Flasks | 80 |
48 |
30 |
20 |
12 |
6 |
4 |
4 |
2 |
WARRANTY: The SteadyShake™ 797R is protected by a 24-month limited warranty.