HV-25 and HV-50 Specifications

105ºC to 126ºC

105ºC to 135ºC

128ºC

137ºC

45ºC to 60ºC

Heating at 60ºC to 100ºC for up to 1 hour (temperature and time programmable), followed by 45ºC to 60ºC
(programmable for up to 20 hours to prevent coagulation)

3 to 22 psi gauge (0.02 to 148MPa)

3 to 30 psi (0.02 to 0.206MPa)

27 psi (0.186MPa)

38 psi (0.26MPa)

1 to 250 minutes

Program autoclave to start 1 minute to 7 days later

19.0" x 18.0" x 37.4"
(48 cm x 46 cm x 95 cm)

20" x 21" x 41"
(51 cm x 53 cm x 104 cm)

25 liters
9.4" x 21.6" (24 cm x 55 cm)

50 liters
11.8" x 28.0" (30 cm x 71 cm)

Dual-sensing lid interlock, over-pressure power cutoff, over-temperature power cutoff, low-water power cutoff, mechanical pressure relief valve, microprocessor-controlled pressure relief valve, lid-closure detector, over-current detector and circuit breaker

Heating -> Sterilization -> Exhaust (from no exhaust to slow, programmable) -> Warming -> Completion

Heating -> Sterilization -> Exhaust (from no exhaust to slow, programmable) -> Completion

Heating -> Sterilization -> Exhaust (fast, default) -> Completion

Rapid melting at 60°C to 100°C (temperature and time programmable) -> Maintain at 45°C to 60°C (temperature programmable) -> Completion

Mesh wire baskets, buckets (pails), and round test tube racks

Floating (load) sensor, digital printer, and data logger

120V, 50/60 Hz (220V/240V available)

1500 watts (1500VA)

2000 watts (2000VA)

160 lb (73 kg)

180 lb (82 kg)