| MODEL |
HV-85 |
HV-110 |
| TEMPERATURE |
|
| Operating Range |
105ºC to 135ºC |
| Display Range |
137ºC |
| Warming Range |
45ºC to 60ºC |
| Agar Dissolution |
Heating at 60ºC to 100ºC for up to 1 hour (temp. and time programmable), followed by 45ºC to 60ºC (temp. programmable) for up to 20 hours. |
| GAUGE PRESSURE |
|
| Operating Range |
3 to 30 psi (gauge), 0.021 to 0.21MPa |
Maximum
Allowable |
38 psi (gauge), 0.26MPa |
| TIMER |
|
| Sterilization |
1 to 250 minutes |
| Delayed Auto-start |
Program autoclave to start 1 minute to 7 days later |
| DIMENSIONS |
|
| Overall (W x D x H) |
(26 x 25.6 x 39.4) in
(66 x 65 x 100) cm |
(26 x 25.6 x 46.5) in
(66 x 65 x 118) cm |
| Chamber (Diameter x Height) |
85 liters
16.5" x 24.2" (42 cm x 61.5 cm) |
110 liters
16.5" x 31.3" (42 cm x 79.5 cm) |
| SAFETY DEVICES |
Dual-sensing lid interlock, over-pressure power cutoff, over-temperature power cutoff, low-water power cutoff, mechanical pressure relief valve, microprocessor-controlled pressure relief valve, lid-closure detector, over-current detector and circuit breaker |
| PROGRAMS |
|
| 1. For agar |
Heating -> Sterilization -> Exhaust (slow, programmable) -> Warming -> Completion |
| 2. For liquids |
Heating -> Sterilization -> Exhaust (slow, programmable) -> Completion |
| 3. For solids |
Heating -> Sterilization -> Exhaust (fast, programmable) -> Completion |
4. For melting agar
or for faster start-up |
Rapid melting at 60°C to 100°C (temperature and time programmable) -> Maintain at 45°C to 60°C (temperature programmable) -> Completion |
| ACCESSORIES |
|
| Stainless steel |
Mesh wire baskets, buckets (pails), and tube rack |
| Factory or field installed |
Floating (load) sensor, auto water supply unit and digital printer |
| POWER |
|
| Source |
208V/220V/240V, 50/60 Hz, single phase |
| Consumption |
3000 watts (3000VA) |
4000 watts (4000VA) |
| SHIPPING WEIGHT |
282 lb (128 kg) |
308 lb (140 kg) |
