| MODEL |
HRH-110 |
| Outer Dimensions |
(690W x 1150D x 1385H) mm, (27.2W x 45.3D x 54.5H) in |
| Chamber Size |
(420 Diameter x 795 Depth) mm, (16.5” Diameter x 31.3” Depth) in |
| Chamber Material |
Stainless steel SUS304 |
| Sterilization Temperature |
105ºC – 123ºC (programmable) |
| Temperature Display Range |
5ºC - 125ºC |
| Sterilization Timer |
1 ~ 60 min (remaining time displayed) |
| Drying Timer |
1 ~ 90 min (remaining time displayed) |
| Sterilization and Operation Modes |
|
1) For solids - sterilization and drying |
|
2) For solids - sterilization without drying and fast exhaust |
|
3) For liquids - sterilization without drying and slow exhaust |
|
4) Supplementary drying (if needed after sterilization mode 1) |
|
Maximum allowable
Pressure (Gauge Pressure) |
0.16Mpa (1.6 kg/cm2G) |
| Thermometer Digital display |
5ºC - 125ºC |
| Pressure Gauge Analog display |
-0.1 ~ 0.4 Mpa (76 cm Hg-4kgf/cm2) |
| Drying Method |
Vacuum pump and heating |
| Safety Devices |
|
-Pressure Relief Valve |
|
-Breaker with GFIC |
| -Vacuum Pump Breaker |
| -Low-water Power Cut-off |
|
-Error Detection: |
|
Insufficient water in the exhaust bottle |
|
Wire breakage in temperature sensor |
|
Over heating, over cooling, and over pressure |
|
Door not properly locked
|
|
| Standard Accessories |
Drain hose, water supply hose, caster stopper, operation manual |
| Options |
Chart recorder, load sensor, square type wire basket,
wire basket with solid bottom and dressing case |
| Power Source |
AC220V / single phase |
| P1ower Consumption |
3.2KW |
| Net Weight (approx.) |
85 lb, (175 kg) |
