| MODEL |
HG-50 |
HG-80 |
| Outside Dimensions |
(19.7W x 27.2D x 35.0H) in
(455W x 691D x 890H) mm |
(19.7W x 27.2D x 40.6H) in
(455W x 691D x 1030H) mm |
| Chamber Dimensions |
(14.3D x 18.2H) in,
(364D x 482H) mm |
(14.3D x 28.7H) in,
(364D x 730H) mm |
| Chamber Volume |
50L working, 60.0L actual volume |
76L working, 85.1L actual volume |
| Temperature Range |
105°C to 135°C |
| Sterilization Timer |
1 to 300 minutes |
Media Warming/
Holding Temperature |
Programmable at 45°C to 60°C to keep media warm up to 24 hours |
| Auto-Start Timer |
Initiate a cycle 1 to 99 hours later |
| Cooling Fan |
Switch to turn fan on or off |
| Air Removal Timer |
Programmable, 3 to 9 minutes after temperature has reached 97°C |
| Steam Venting |
Selectable from: No venting and three other venting rates |
Temperature for Release
of Lid Interlock |
Programmable, 60°C to 97°C for greater safety and flexibility |
Sterilization
Program Cycles |
1) Liquid cycle, 2) Agar (liquid with warming) cycle, and 3) Solid cycle |
Additional Cycle for
Agar Dissolution |
Cycle for dissolving and keeping agar warm (no sterilization) |
Agar Dissolution
Protocol |
Initially at 60°C-100°C for 1-60 min., then at 45°C-60°C for up to 24 hrs. |
| Safety Features |
Circuit breaker with GFCI, low-water power cut-off, over-temp power cutoff, over-pressure power cut-off, safety valve, sensor for improper lid closing |
| Steam Condenser |
15-liter water tank |
| Drain Water Bottle |
2 liters |
| Power Requirements |
120V or 220V, 50/60 Hz, single phase |
220V, 50/60 Hz, single phase |
| Power Consumption |
2.0kW, optional 3.0kW for 220V only |
3.9.kW |
| Shipping Weight |
154 lb (70 kg) |
181 lb (82 kg) |
